价格:￥0.00/件
起订:1件
供应:10000件
发货:30天内

发送询价

DR150 军标级耐油橡胶热收缩套管
应用
由辐照交联优质耐油聚合物制成，适合应用于需要耐油、耐磨擦的环境，具有优良的耐油、耐化学腐蚀和耐溶剂性能，对线束、线缆或被覆元器件提供保护。
特性
收缩比：2:1
优异的耐油、耐化学腐蚀性能
柔软、阻燃
符合ROHS、REACH等环保规范
颜色
标准颜色：黑色
操作温度范围
连续使用温度：-75℃～150℃
*低完全收缩温度：150℃
符合标准
SAE AMS-DTL-23053/16
性能指标
性能 指标要求 测试方法 典型值
纵向收缩率 ≤10％ ASTM D 2671 ≤5％
抗张强度 11.7MPa min ASTM D 638 ≥13MPa
断裂伸长率 200％ min ASTM D 638 ≥400％
老化后抗张强度
（热老化150℃，168小时） 10.3MPa min ASTM D 638 ≥12MPa
老化后断裂伸长率(150℃,168小时) 200％ min ASTM D 638 ≥300％
热冲击
（200℃，4小时） 无裂纹 ASTM D 2671 无裂纹
低温柔软性
（-65℃，4小时） 无裂纹 ASTM D 2671 无裂纹
绝缘耐压和击穿 2500V,60sec,不击穿 ASTM D 2671 不击穿
击穿强度 11.9 KV/mm min ASTM D 2671 ≥16KV/mm
体积电阻率 109Ω•cm min ASTM D 876 ≥1010cm
腐蚀性 无腐蚀 ASTM D 2671 无腐蚀
阻燃性 1分钟内自熄 ASTM D 2671 通过
耐液性（23℃，24hrs）
抗张强度 10.3MPa min ASTM D 638 ≥12MPa
断裂伸长率 200％ min ASTM D 638 ≥300％
击穿强度 7.9 KV/mm min ASTM D 2671 ≥12KV/mm
规格尺寸
规格 收缩前（mm） 收缩后（mm） 标准包装
（m/卷）
英制 公制 内径（min） 内径（max） 壁厚 
3/32 Ф2.4 2.4 1.2 0.51+0.08 200
1/8 Ф3.2 3.2 1.6 0.76+0.15 100
3/16 Ф4.8 4.8 2.4 0.84+0.15 100
1/4 Ф6.4 6.4 3.2 0.89+0.15 100
3/8 Ф9.5 9.5 4.8 1.02+0.20 50
1/2 Ф12.7 12.7 6.4 1.22+0.20 50
3/4 Ф19.1 19.1 9.5 1.45+0.28 30
1 Ф25.4 25.4 12.7 1.78+0.28 30
11/2 Ф38.1 38.1 19.1 2.41+0.41 30
2 Ф50.8 50.8 25.4 2.79+0.41 25
其他规格尺寸可定制
DR150Diesel Resistant Elastomeric Heat Shrinkable Tubing
Application
It is made of irradiation cross-linked specially formulated flexible elastomeric compounds. It is particular suitable for resistance to aviation and diesel fuels, hydraulic fluids and lubricating oils, and chemical solvents. To protect cables, wiring harnesses and connectors in military vehicles. It is also well suited for the demands of motor sport cable harness.
Characteristics
Shrink ratio:2:1
Excellent resistance to oil, diesel and hydraulic fluids.
Flexible, flame-retardant.
ROHS and REACH compliant.
Color
Standard color: Black
Operating Temperature Range
Operating temperature:-75℃～150℃
Minimum fully recovery temperature:150℃
Approval
SAE AMS-DTL-23053/16
Property
Property Requirement Test method Typical data
Longitudinal shrinkage ≤10％ ASTM D 2671 ≤5％
Tensile strength 11.7MPa min ASTM D 638 ≥13MPa
Elongation at break 200％ min ASTM D 638 ≥400％
Tensile strength after aging
（150℃,168hrs） 10.3MPa min ASTM D 638 ≥12MPa
Elongation after aging
（150℃,168hrs） 200％ min ASTM D 638 ≥300％
Heat shock
 No crack ASTM D 2671 No crack
Low-temperature flexibility（-65℃,4hrs） No crack ASTM D 2671 No crack
Dielectric voltage withstand 2500V,60sec,no breakdown ASTM D 2671 No breakdown
Dielectric strength 11.9 KV/mm min ASTM D 2671 ≥16KV/mm
Volume resistivity 109Ω•cm min ASTM D 876 ≥1010cm
Copper corrosion No corrosion ASTM D 2671 No corrosion
Flammability Self-extinguishing within one seconds ASTM D 2671 Pass
Fluids resistance（23℃，24hrs）
Tensile strength 10.3MPa min ASTM D 638 ≥12MPa
Elongation at break 200％ min ASTM D 638 ≥300％
Dielectric strength 7.9 KV/mm min ASTM D 2671 ≥12KV/mm
Sizes
Size As supplied (mm) After recovered(mm) Standard packing
(m/roll)
inch mm Inside diameter(min) Inside diameter max Wall thickness 
3/32 Ф2.4 2.4 1.2 0.51+0.08 200
1/8 Ф3.2 3.2 1.6 0.76+0.15 100
3/16 Ф4.8 4.8 2.4 0.84+0.15 100
1/4 Ф6.4 6.4 3.2 0.89+0.15 100
3/8 Ф9.5 9.5 4.8 1.02+0.20 50
1/2 Ф12.7 12.7 6.4 1.22+0.20 50
3/4 Ф19.1 19.1 9.5 1.45+0.28 30
1 Ф25.4 25.4 12.7 1.78+0.28 30
11/2 Ф38.1 38.1 19.1 2.41+0.41 30
2 Ф50.8 50.8 25.4 2.79+0.41 25
Other sizes are available upon request.